XJY-301-1
Silicone Pressure Sensitive Adhesive
Silicone Pressure Sensitive Adhesive
XJY-301-3
Silicone Pressure Sensitive Adhesive
Specification
XJY 301-3 Silicone Pressure Sensitive Adhesive (SPSA) is a colorless transparent stick liquid with moderate stripping force, which can be used for various adhesive tapes, such as crepe paper, PET film and other adhesion tapes. It has the strong anti-aging ability, high resistance to high and low temperature, and can be used for substrates such as textured paper or PET film, and has good bonding ability.
XJY-301-3 Silicone Pressure Sensitive Adhesive has those product features:
1. Excellent high and low-temperature resistance;
2. Excellent chemical corrosion, anti-ultraviolet aging, and weather resistance;
3. Good bonding ability, showing good performance on substrates such as PET and textured paper;
| ITEM | PROPERTY |
| Appearance | Colorless or Light Yellow Transparent Liquid |
| Solid content | 58-60% |
| Viscosity | 50000-150000mPa.s |
| Peel Strength (g/inch) | 600-800g/inch |
| Solvent | Toluene |
| Temperature Resistance（℃） | 220 |
| Base Material | PET |
| Specific Gravity | 0.98 |
| Initial Adhesion (#) | 18-22 |
| Adhesive Thickness (μm) | 20 |
| Film Material (μm) | 38 |
Advantage
1. Excellent high and low-temperature resistance.
2. Excellent chemical corrosion, anti-aging, weather resistance.
3. Good bonding ability, in PET and fine paper and other substrates can reflect good performance.
Application
1. Adhesive tap
2. Protective film tape
3. Crepe tape
4. PET tape
Instructions for use
1. It is recommended to use the catalyst Bis(2,4-dichlorobenzoyl) peroxide, BPO (benzoyl peroxide), and the catalyst usage amount is 2-3%;
2. The temperature of the solvent volatilization section is kept below 120°C to ensure the lowest control of catalyst decomposition and complete solvent volatilization, otherwise the tape will produce pores and affect the performance of the adhesive;
3. The catalyst preparation concentration is 10%. After preparation, use it as soon as possible, otherwise, the solvent will consume the catalyst and affect the catalytic effect;
4. During curing, the curing temperature can be appropriately increased to ensure that the catalyst is completely decomposed, otherwise, the tape will easily produce white gel-like substances. If BPO is used as the catalyst, the decomposition of the incomplete catalyst will generate a small amount of carbon dioxide gas, forming pores, and affect the performance of the tape.
Packaging
XJY-301-3 can provide the 200KG inner coated iron drum. If you have special requirements, you can negotiate and customize.
Storage
This product is stored in the original unopened packaging, when the storage temperature is 25°C and below, the validity period of this product is 12 months from the production date.
If the storage period is exceeded, the product should be re-tested, and it can still be used if it meets the quality requirements.