XJY-8250A
Flake Silicone Resin
Polyester Modified Flake Silicone Resin
XJY-83350
Polyester Modified Flake Silicone Resin
Specification
XJY-83350 is a polvester-modifled methylphenyl sllicone resin intermediate used in high-temperature powdeicoatings and liquid coatings.
Slicone resin also has excellent weather reslstance, ozone reslstance, arc reslstance, hydrophobic molstureresistance, salt spray resistance, mildew resistance and other properties. For example, using 20% silicone resinmodified coatings have better water resislance, yellowing resislance and temperature resistance.The wse of a polyester-modifed silicone resin intermediate is aimed at enhancing the temperature resistance andhydrolysis resistance of polyester coatings, as well as improving their hardness. lt can be wsed directly or incomibination with polyesler resins.
CURE CONDITION:
Heat cure, curing at 180-300℃, Recommend heat cure at 220℃or30 minutes；
Mediumn and low bemmperature cure, lt can be cured at room temperaluror low temperaturo by diryer agont hke organotin and phthalate.
| Brand | XJY-8010A |
| Appearance | Transparent or Semitransparency Flake |
| Solid Content(%) | ≥98 |
| Glass Transition Temperature Tg (°C) | 60-110 |
| Silicone Content (%) | 50% |
| Solution | Aromatic, Ester, Ketone |
Application
（1）Used for high temperature resistant, high hardness powder coatings
（2）For solvent-high temperature coating additives
（3）Used for other solvent-based silicone resin coatings to improve the coating's high-temperature resistance， weather resistance, waterproof, hardness, and other properties
Precaution
This information does not include the required product safety information. Please read the product and safetydata sheet belore use and know the safe and health information of related products.
Packaging
(1) Pack in a 25kg cardboard drum or 200kg iron drum.
(2) If necessary, we can negotiate package net weight.
Storage
Store in an unopened package under 25*C. The shelf life of the product is 18 months from the date of production.
Opened containers should be tightly sealed after using to prevent pollution and moisture from entering the product. The maximum storage temperature should be under 25'C.